Coyote Asphalt Remover 300 ml

Coyote Tar & Tar Remover (300 ml) is a specialized cleaning aerosol designed to safely remove tough road contaminants from vehicle bodywork. It effectively dissolves and eliminates asphalt splatters, tree sap, resins, wax, and oil stains that standard car washes often leave behind. The formula is powerful enough to tackle hardened bitumen but is carefully balanced to remain non-aggressive toward automotive paint and clear coats. After application, it leaves surfaces clean and shiny, restoring the vehicle’s pristine look. Coyote Tar Remover is an essential tool for maintaining the lower parts of doors and side sills, especially after driving on freshly repaired roads. Easy to use and fast-acting, it ensures that your car stays protected from permanent staining caused by aggressive road debris.

DANGER
Contains: Hydrocarbons, C6-C7, n-alkanes, isoalkanes, cyclics, < 5% n-hexane; 2-butoxyethanol; ethylene glycol monobutyl ether.
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H332 Harmful if inhaled.
H336 May cause drowsiness or dizziness.
H412 Harmful to aquatic life with long lasting effects.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P260 Do not breathe dust or mist.
P302+P352 IF ON SKIN: Wash with plenty of soap and water.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C.
P501 Dispose of contents/container to hazardous or special waste collection point.

• Product Type: Tar and asphalt remover aerosol

• Volume: 300 ml

• Application: Bodywork, rims, sills, plastic trim

• Key Features: Safe for paintwork, dissolves hardened bitumen, leaves a glossy finish

Method of Use:

• Shake well before use.

• Spray onto the contaminated area.

• Allow to act for 1–2 minutes (do not let it dry on the surface).

• Wipe away the dissolved debris with a soft cloth or sponge.

• Rinse the area thoroughly with water or wash with car shampoo.