Chain grease PETRONAS 75 ml

Petronas Chain Lubricant with PTFE is a premium-grade spray designed for the comprehensive protection and continuous lubrication of transmission chains. Its specialized formula, enriched with PTFE (Teflon), creates a durable low-friction coating that withstands high pressure and reduces mechanical wear. The lubricant features excellent adhesion properties, ensuring it stays on the chain even at high speeds, and offers deep penetration into the pins and rollers. It is highly resistant to atmospheric agents like rain and dust, preventing rust and corrosion. Safe for O-ring and X-ring seals, this compact 75 ml version is perfect for on-the-go maintenance, keeping your chain running smoothly, quietly, and efficiently wherever you ride.

DANGER
Contains: Hydrocarbons, C7, n-alkanes, isoalkanes, cyclics.
H222, H229 Extremely flammable aerosol. Pressurised container: May burst if heated.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
H412 Harmful to aquatic life with long lasting effects.
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P103 Read and follow all instructions carefully.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P271 Use only outdoors or in a well-ventilated area.
P273 Avoid release to the environment.
P405 Store locked up.
P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122°F.
P501 Dispose of contents / container in accordance with applicable regulations.

• Product Type: Transmission chain lubricant with PTFE

• Formula: Enriched with PTFE (Teflon) for reduced friction

• Compatibility: Safe for O-rings, X-rings, and all seals

• Key Features: High adhesion, deep penetration, weather-resistant

Method of Use:

1. Shake well before use.

2. Lubricate with the supplied nozzle held close to the chain.

3. Apply carefully and sparingly to a cleaned chain.

4. Allow to soak in briefly before operation.