Chain grease PETRONAS 200 ml

Petronas Chain Lubricant with PTFE (200 ml) is a premium-grade spray designed for the comprehensive protection and continuous lubrication of transmission chains. Its specialized formula, enriched with PTFE (Teflon), creates a high-performance low-friction coating that withstands extreme pressure and reduces mechanical wear. The lubricant features exceptional adhesion properties, ensuring it remains on the chain at high rotational speeds, and offers deep penetration into pins and rollers. It is highly resistant to atmospheric agents like rain and road salt, providing a powerful shield against rust. Safe for O-ring and X-ring seals, this 200 ml canister is the standard choice for regular maintenance, ensuring your chain runs smoothly, quietly, and efficiently under all riding conditions.

DANGER
Contains: Hydrocarbons, C7, n-alkanes, isoalkanes, cyclics.
H222, H229 Extremely flammable aerosol. Pressurised container: May burst if heated.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
H412 Harmful to aquatic life with long lasting effects.
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P103 Read and follow all instructions carefully.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P271 Use only outdoors or in a well-ventilated area.
P273 Avoid release to the environment.
P405 Store locked up.
P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122°F.
P501 Dispose of contents / container in accordance with applicable regulations.

• Product Type: Transmission chain lubricant with PTFE

• Formula: Enriched with PTFE (Teflon) for extreme friction reduction

• Compatibility: Fully safe for O-rings, X-rings, and all seals

• Key Features: Excellent adhesion, deep penetration, weather-resistant

Method of Use:

1. Shake well before use.

2. Apply to a cleaned and dry chain, holding the nozzle close.

3. Spray evenly and sparingly on the inner side of the chain.

4. Allow to soak in for 10–15 minutes before operating.